Enable DIS with Efficiency Program for MY2010+ (Not a complete Program without the Start/Stop System) > Adaption -> Channel 39, add 16 to your valueĢ1. Enable Battery meter *does not appear to work on facelift cars with MMI 3G+ HDD Navigation > Long Coding Helper -> Byte 1īit 6 set to 1 to enable hill hold assist. Enable Automatic Hill Hold Assist ‘lite’ only works on certain abs modules – see below link Select “D on/S on” from New value drop down menuġ8. Select “Single Gear Display” from top channel drop down menu Enable Automatic Gear selection shown in DIS Enable Optical rear parking for cars without front parking sensors > Long Coding Helper -> Byte 8īit 0 – Emergency Brake Flashing via Turn Lights active (1 = active)īit 1 – Emergency Brake Flashing via Brake Lights active (1 = active)ġ6.
> Long Coding Helper -> Byte 0Īt Channel drop down choose “Volume of structure borne noise actuator” (only choice)Įnter a value in the proper box (0% = mute ) > Adaptation -> Set channel 2 & 3 to 250 Disable NAV & Phone warning messages while entering data at speed > Long Coding Helper -> Byte 5īit 3 – Set to 0 to disable “lights are on” warning when you open the door.ġ2. If you have already eliminated the blinking, the you will need to go to Byte 03 and undo the modification.ĭisable bulb error message with LED reverse lights installed
There is an LED dim instead of blink.īyte 02 – Check bit 6 (Side Marker as DRL)
#Vcds key programming mod
Instead of complete blink off, there is another mod that comes as stock in Europe. > Channel 3 (Heading Wink Brightness)ĭefault Value is 26, Setting value to 88 (Makes it identical to normal brightness)ġ0. Disable LED ‘wink’ on turn signal – faceliftĠ9 – Cent.
#Vcds key programming full
> Long Coding Helper -> Byte 3īit 2 – LEDs remain at full brightness with parking lights (1 = active)īit 7 – Turn off LED-strip DRLs with indicators (1 = active)ĩ. Disable LED ‘wink’ on turn signal – pre facelift > Long Coding Helper -> Byte 10īit 3 – Set to 0 to disable amber side markers (U.S. – choose the model of choice in ‘configuration line’ĥ. It has been noted before to keep well away from the “Bootloader”ģ. Use this hidden menu at your own risk, you can do some serious damage to your system if you mess with the wrong settings. Note: To access the hidden menu, hold down car and setup together for 5 seconds
0 kommentar(er)
